purpose of line in iron ore pellets

purpose of line in iron ore pellets

Iron Ore Processing for the Blast FurnaceIron Ore Processing for the Blast Furnace. (Courtesy of the National Steel Pellet Company). The following describes operations at the National Steel Pellet Company, an iron ore mining and processing facility located on the Mesabi Iron Range of Minnesota. Creating steel from low-grade iron ore requires a long process of.Effect of adding line on the metallurgical properties of iron ore .Aug 10, 2015 . In general, the main types of pellets for the purposes of making iron are acid, basic and fluxed. In order to produce high-quality pellets, certain additives are important. The most common fluxing materials for iron ore pellet production are line (CaCO3), dolomite (Ca,Mg(CO3)2) and olivine (Mg2SiO4),.

Development on Iron Ore Pelletization Using Calcined Lime . - j-stageKEY WORDS: iron ore plletization; combined flux; use of calcined lime; elimination of bentonite; replace- ment of line; pellet properties. 1. Introduction. In blast furnace (BF) iron making lime stone is used as source of CaO to neutralize the all acidic oxides present in iron ore and make fluid slag of suitable basicity.Iron ore pelletizing - Iron Ore Pellets are formed from beneficiated or run of mine iron fines. The iron is usually ground to a very fine level and mixed with line or dolomite as a fluxing agent and bentonite or organic binders as a binding agent. If the ore is a Hematite ore, coke or anthracite coal can be added to the mix to work as an internal.

22 Comments

Development on Iron Ore Pelletization Using Calcined Lime . - j-stage

KEY WORDS: iron ore plletization; combined flux; use of calcined lime; elimination of bentonite; replace- ment of line; pellet properties. 1. Introduction. In blast furnace (BF) iron making lime stone is used as source of CaO to neutralize the all acidic oxides present in iron ore and make fluid slag of suitable basicity.

Chemical Grade Line for Ironmaking - Carmeuse Lime & Stone

Blast Furnace – Chemical grade line is utilized to produce the slag which removes impurities from the iron ore reduction process to make the liquid pig iron. Pellet Production – Chemical grade line is pulverized and utilized in forming a fluxed iron ore pellet that is used in the blast furnace process.

Pyroxenite, Olivine, Swelling, Magnesioferrite, RDI, Iron ore pellets

Iron ore agglomerate quality plays a vital role in decreasing the reducing . the use of fluxed pellets in blast furnace due to their good strength and .. Table 2. Particle size distribution of the ground materials used for pelletizing. Size range (μm). Iron ore. Bentonite. Line. Pyroxenite. Coal. +150. 10.8. 0.0. 15.4. 29.3. 7.7.

Iron - The Essential Chemical Industry

The blast furnace uses either high-grade iron ore or the iron ore pellets together with coke and line. In a modern blast furnace, the mass of each component and the timing of its addition to the furnace are computer-controlled, responding automatically to the conditions prevailing at that time in the furnace.

Pyroxenite, Olivine, Swelling, Magnesioferrite, RDI, Iron ore pellets

Iron ore agglomerate quality plays a vital role in decreasing the reducing . the use of fluxed pellets in blast furnace due to their good strength and .. Table 2. Particle size distribution of the ground materials used for pelletizing. Size range (μm). Iron ore. Bentonite. Line. Pyroxenite. Coal. +150. 10.8. 0.0. 15.4. 29.3. 7.7.

Raw materials - Jernkontoret

May 13, 2015 . For the production of steel, there is a need for iron raw material in the form of iron ore or scrap metal, together with alloying elements so that the material acquires the desired for properties. In the production of ore-based steel, coal is also needed as a reducing agent and line as a slag former.

Effect of Grain Size Distribution of Line in Iron Ore Pellets *

Apr 8, 2017 . a) Effect of coarse line in a poorly slag formation generating a weak-porous structure; B) Effect of size distribution of line in pellets porosity.

steel mill - MSU Geography - Michigan State University

Steel is a remanufactured product that uses pig iron as its main raw material. Pig-Iron Production The basic materials used for the manufacture of pig iron are iron ore, coke, and line. Coke is the hard, porous residue left after the destructive distillation of coal. Used as a reducing agent in the smelting of pig iron and as.

Characterisation studies on swelling behaviour of iron ore pellets .

Nov 28, 2016 . The raw material silica, line addition, i.e. basicity – CaO/SiO2 of pellet decides the mode, temperature and the amount of melt formed. The properties of the pellets are, therefore, largely governed by the form and degree of bonding achieved between ore particles and also by the stability of these.

the making of iron and steel - SEAISI

The other major steelmaking method involves the melting and refining of steel scrap in an Electric Arc. Furnace. Pig iron and refined iron ore pellets (briquetted iron) can also be used, and because this method is economic at lower volumes these operations are called mini mills. Plants that use. Electric Arc Furnaces can be.

Characterisation studies on swelling behaviour of iron ore pellets .

The raw material silica, line addition, i.e. basicity – CaO/SiO2 of pellet decides the mode, temperature and the amount of melt formed. The properties of the pellets are, therefore, largely governed by the form and degree of bonding achieved between ore particles and also by the stability of these bonding phases during.

Improving reducibility of iron ore pellets by optimization . - doiSerbia

reducibility of iron ore pellets of a specific chemistry can be improved by the optimization of physical parameters such as induration . value of 69.5 %. Furthermore, on optimizing additives size, such as line fines and anthracite coal fines at -350 mesh . consumption. Use of agglomerates such as pellets and sinter in.

Harmony in flux - Tata Steel - Tata group

Tata Steel recently commissioned an iron ore pelletisation plant at Jamshedpur with a capacity of 6-million tonnes per annum. To improve pellet quality, steel plants typically use carbonate fluxes such as line or dolomite. But these conventional fluxes do not work well with Indian iron-ore fines, which have a high.

use of clay in iron ore pellets

use of clay in iron ore pellets | Solution for ore miningIron ore – Wikipedia, the free encyclopedia. This stockpile of iron ore pellets will be used in steel production. … Small amounts of aluminium (Al) are present in ..e of clay in iron ore.

Iron Ore and Pellets - Vale

What are pellets? Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste.

On the Iron Range, a push for a new kind of iron | Minnesota Public .

Jun 24, 2015 . After the iron ore is combined with coal and line in 12-story-high stacks, the mixture is heated to more than 2,600 degrees to create the molten iron . like fast-growing Nucor are instead building electric arc furnaces, "mini mills" that use scrap metal or a more pure form of iron than taconite pellets.

AP-42, CH 12.5: Iron And Steel Production - EPA

required to produce 0.9 Mg (1 ton) of product sinter. 12.5.1.2 Iron Production -. Iron is produced in blast furnaces by the reduction of iron bearing materials with a hot gas. The large, refractory lined furnace is charged through its top with iron as ore, pellets, and/or sinter; flux as line, dolomite, and sinter; and coke for fuel.

Review of Organic Binders for Iron Ore Agglomeration

May 22, 2013 . Iron ore pellets are one type of iron-rich, intermediate product used during primary iron and steel making. . production process has been enabled by the use of binders – practical experience has shown that .. basic fluxes derived from a 50/50 mixture of line (CaCO3) and dolomite (CaCO3•MgCO3),.

Blast furnace | metallurgy | Britannica

The furnace charge, or burden, of iron-bearing materials (e.g., iron-ore pellets and sinter), coke, and flux (e.g., line) descends through the shaft, where it is . Coke had been widely adopted for use in blast furnaces by the mid-18th century, and the principle of heating air before it entered the furnace was introduced in.

Composition and Analysis for Pellets - The Iron Platform

Chemical sameness criteria based upon the bulk chemical composition of iron ore pellets;. • Particle size . variable mixture of iron ores, line, olivine, bentonite, dolomite and miscellaneous iron-bearing materials in the . nominal size, and pellet fines can be considered as pellets for the purposes of REACH. Table 2:.

purpose of line in iron ore pellets,Beneficiation Plants and Pelletizing Plants for Utilizing Low Grade .

Recently, the grade of iron ore deposits has deteriorated and further development of low grade deposits is desired. Presently, the most effective and often followed route taken to utilize such deposits is the provision of beneficiation plants for upgrading iron ore and pelletizing plants for agglomerating. Kobe Steel has much.

Pre:stone crushers eastern cape
Next:cement processing plants saudi arabia